Remarkable change in the broadband electrical behavior of poly(vinylidene fluoride)–multiwalled carbon nanotube nanocomposites with the use of different processing routes

Poly(vinylidene fluoride) (PVDF) nanocomposites have plenty of applications in the electronic realm. In this study, we produced nanocomposites based on PVDF and multiwalled carbon nanotubes (MWCNTs), with various MWCNT loadings, using three different processing routes: solution mixing, melt mixing, and electrospinning. The broadband electrical behavior of these nanocomposites was studied and compared via impedance spectroscopy. The morphologies of the nanocomposites were characterized by transmission electron microscopy and scanning electron microscopy. The results reveal that the electrical behaviors of the samples were completely different according to the processing route used. Solution mixing was the most suitable method for producing nanocomposites with the highest conductivities, at low MWCNT loadings, whereas electrospinning was the most suitable method for producing nanocomposites with the lowest dielectric permittivity. These differences were attributed to the different arrangements of the MWCNTs caused by the different processes. Although the solution-mixed samples exhibited long and twisted MWCNTs, the melt-mixed samples had shorter MWCNTs, and the electrospun samples had MWCNTs embedded and aligned inside the insulating polymer nanofibers. Thus, these results project a vast horizon for tailoring the structure and thereby the broadband electrical behavior of PVDF–MWCNT nanocomposites for different types of applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47409.     

Investigation of thermal performance of SAC variables using fuzzy logic based expert system

The thermal performance of a solar air collector (SAC) is investigated experimentally under the different climatic conditions of north eastern India using fuzzy logic based expert system (FLES). The FLES based on subtractive clustering (SC) with the fuzzy logic method where here, SC is used for extraction of optimal fuzzy IF-THEN rules while a fuzzy logic is used for modeling of SAC variables. This work considered four input variables [like mass flow rate (m), collector tilt angles (θ), solar radiation (Q), temperature (T)] and the four output variables [i.e. efficiency (η), exergetic efficiency (η_II), temperature rise (∆T), and pressure drop (∆P)]. First, 272 trials of experimentation on SAC are performed by varying m from 0.0078 to 0.0118 kg/s and θ from 30 to 60°, whereas the variation of metrological data is obtained in different working days. Then modeling and parametric analysis is carried out for SAC. Experimental results reveal that the value of η increases with the increase in m, Q, T and θ up to 45°. The higher value of m results in a higher value of ∆P and that reduces the value of η_II. Also, FLES model provides comparable and acceptable values for SAC. At last, validation of the FLES model is done via published data to confirm the results.

     

Poly(N-vinylpyrrolidone)-stabilized colloidal graphene-reinforced poly(ethylene-co-methyl acrylate) to mitigate electromagnetic radiation pollution

Polymer Bulletin - Electrically conducting flexible polymeric nanocomposite has been fabricated through wet mixing method where conducting inclusion was acoustically exfoliated pristine graphene...     

Micro RNA-124a Regulates Lipolysis via Adipose Triglyceride Lipase and Comparative Gene Identification 58

Lipolysis is the biochemical pathway responsible for the catabolism of cellular triacylglycerol (TG). Lipolytic TG breakdown is a central metabolic process leading to the generation of free fatty acids (FA) and glycerol, thereby regulating lipid, as well as energy homeostasis. The precise tuning of lipolysis is imperative to prevent lipotoxicity, obesity, diabetes and other related metabolic disorders. Here, we present our finding that miR-124a attenuates RNA and protein expression of the major TG hydrolase, adipose triglyceride lipase (ATGL/PNPLA2) and its co-activator comparative gene identification 58 (CGI-58/ABHD5). Ectopic expression of miR-124a in adipocytes leads to reduced lipolysis and increased cellular TG accumulation. This phenotype, however, can be rescued by overexpression of truncated Atgl lacking its 3''UTR, which harbors the identified miR-124a target site. In addition, we observe a strong negative correlation between miR-124a and Atgl expression in various murine tissues. Moreover, miR-124a regulates the expression of Atgl and Cgi-58 in murine white adipose tissue during fasting as well as the expression of Atgl in murine liver, during fasting and re-feeding. Together, these results point to an instrumental role of miR-124a in the regulation of TG catabolism. Therefore, we suggest that miR-124a may be involved in the regulation of several cellular and organismal metabolic parameters, including lipid storage and plasma FA concentration.     

PDMS microfluidics: A mini review

Polydimethylsiloxane (PDMS) is hailed as one of the foundational materials for microfluidics. Though a silicone-based elastomer of many desirable properties, the emergence of microfluidic fabrication techniques, especially soft lithography, has elevated its status to an exceptional one. In this mini review, we look at the salient aspects that make PDMS so special in achieving such a coveted status in the microfluidics community. A methodical approach is followed to touch upon the application of PDMS in various aspects of microfluidics with the advantages, limitations, and some future directions. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48958.     

Facile synthesis of asymmetric patchy Janus Ag/Cu particles and study of their antifungal activity

Asymmetric patchy Ag/Cu Janus nanoparticles (NPs) were synthesized via a “seed-mediated” approach. This is the first report of synthesis of nanometer sized metal-based Janus NPs without using complicated methods. Selective adsorption of the surfactant onto the seed NPs leads to the formation of Janus type structure. Subsequently the reduction potential of Ag⁺/Ag⁰ and Cu²⁺/Cu⁰ systems directs the formation of the “patch”. The patchy Janus NPs show significant antifungal activity towards a potent rice pathogen thus offering the prospect of future application in crop protection.     

Touch‐Interactive Flexible Sustainable Energy Harvester and Self‐Powered Smart Card

Sustainable and safe energy sources combined with cost effectiveness are major goals for society when considering the current scenario of mass production of portable and Internet of Things (IoT) devices along with the huge amount of inevitable e‐waste. The conceptual design of a self‐powered “eco‐energy” smart card based on paper promotes green and clean energy, which will bring the zero e‐waste challenge one step closer to fruition. A commercial raw filter paper is modified through a fast in situ functionalization method, resulting in a conductive cellulose fiber/polyaniline composite, which is then applied as an energy harvester based on a mechano‐responsive charge transfer mechanism through a metal/conducting polymer interface. Different electrodes are studied to optimize charge transfer based on contact energy level differences. The highest power density and current density obtained from such a paper‐based “eco‐energy” smart card device are 1.75 W m^?2 and 33.5 mA m^?2 respectively. This self‐powered smart energy card is also able to light up several commercial light‐emitting diodes, power on electronic devices, and charge capacitors.     

Structural investigation and giant dielectric response of CaCu<Subscript>3</Subscript>Ti<Subscript>4</Subscript>O<Subscript>12</Subscript> ceramic by Nd/Zr co-doping for energy storage applications

High performance dielectric materials are highly required for practical application for energy storage technologies. In this work, high-k pristine and modified calcium copper titanate having nominal formula Ca_0.95Nd_0.05Cu₃Ti_4?xZr_xO₁₂ (x?=?0.01, 0.03 & 0.10) were synthesized and characterized for structural and dielectric properties. Single phase formation of the synthesized compositions was confirmed by X-ray diffraction patterns and further analysed using Rietveld refinement technique. Phase purity of the synthesized ceramics was further confirmed by Energy-dispersive X-ray Spectroscopy (EDX) analysis. SEM images demonstrated that grain size of the modified CCTO ceramics was controlled by Zr⁴⁺ ions due to solute drag effect. Impedance spectroscopy was employed to understand the grain, grain boundaries and electrode contribution to the dielectric response. Nyquist plots were fitted with a 2R-CPE model which confirms the non-ideality of the system. Substitution of specific concentration of Nd and Zr improved the dielectric properties of high dielectric permittivity (ε′ ~?16,902) and minimal tanδ (≤?0.10) over a wide frequency range. The giant ε′ of the investigated system was attributed to internal barrier layer capacitance (IBLC) effect and reduced tanδ accredited to enhanced grain boundaries resistance due to substitution of Zr⁴⁺ ions at Ti⁴⁺ site.